original text by Pierluigi Paganini
Networking equipment vendor Zyxel addressed a critical vulnerability impacting its network-attached storage (NAS) devices.
Zyxel addressed a critical vulnerability, tracked as CVE-2022-34747, impacting its network-attached storage (NAS) devices.
The CVE-2022-34747 (CVSS score: 9.8) flaw is classified as a format string vulnerability that resides in Zyxel NAS326 firmware versions prior to V5.21(AAZF.12)C0. An attacker can exploit the vulnerability to achieve unauthorized remote code execution via a crafted UDP packet.
“A format string vulnerability was found in a specific binary of Zyxel NAS products that could allow an attacker to achieve unauthorized remote code execution via a crafted UDP packet.” reads the advisory published by the vendor.
Below is the list of affected models and the firmware patches released by the company.
|AFFECTED MODEL||AFFECTED VERSION||PATCH AVAILABILITY|
|NAS326||V5.21(AAZF.11)C0 and earlier||V5.21(AAZF.12)C0|
|NAS540||V5.21(AATB.8)C0 and earlier||V5.21(AATB.9)C0|
|NAS542||V5.21(ABAG.8)C0 and earlier||V5.21(ABAG.9)C0|
The vulnerability was reported to Zyxel by Shaposhnikov Ilya.
In May 2022, Zyxel released security updates to address multiple vulnerabilities affecting multiple products, including firewall, AP, and AP controller products.
Below is the list of the four vulnerabilities, the most severe one is a command injection flaw in some CLI commands tracked as CVE-2022-26532 (CVSS v3.1 7.8):
- CVE-2022-0734: A cross-site scripting vulnerability was identified in the CGI program of some firewall versions that could allow an attacker to obtain some information stored in the user’s browser, such as cookies or session tokens, via a malicious script.
- CVE-2022-26531: Multiple improper input validation flaws were identified in some CLI commands of some firewall, AP controller, and AP versions that could allow a local authenticated attacker to cause a buffer overflow or a system crash via a crafted payload.
- CVE-2022-26532: A command injection vulnerability in the “packet-trace” CLI command of some firewall, AP controller, and AP versions could allow a local authenticated attacker to execute arbitrary OS commands by including crafted arguments to the command.
- CVE-2022-0910: An authentication bypass vulnerability caused by the lack of a proper access control mechanism has been found in the CGI program of some firewall versions. The flaw could allow an attacker to downgrade from two-factor authentication to one-factor authentication via an IPsec VPN client.
Networking device maker Zyxel is warning customers today of a new critical remote code execution (RCE) vulnerability impacting three models of its Networked Attached Storage (NAS) products.
The vulnerability is tracked as CVE-2022-34747 and has received a CVSS v3 severity score of 9.8, rated critical, but not many details have been disclosed.
“A format string vulnerability was found in a specific binary of Zyxel NAS products that could allow an attacker to achieve unauthorized remote code execution via a crafted UDP packet,” explains the advisory.
Security researcher Shaposhnikov Ilya discovered the vulnerability on June 2022. As a result, Zyxel gradually released security updates for the impacted models over the following months.
The NAS devices vulnerable to this flaw are NAS326, NAS540, and NAS542, all still within their active support period.
The vulnerable firmware versions are V5.21(AAZF.11)C0 and earlier for NAS326, V5.21(AATB.8)C0 and earlier for NAS540, and V5.21(AATB.8)C0 or older for NAS542.
The vendor has already released security updates for the impacted devices in the form of firmware updates, with links to the downloads in the security advisory.
Alternatively, you can visit Zyxel’s official download portal, enter your device model, and download the latest firmware update listed in the results.
Remote code execution flaws allow many different attacks, including bypassing the need for user authentication, elevation of privilege, or any other limiting prerequisite.
The vulnerability could be abused to steal data, delete data, or deploy ransomware on Internet-exposed NAS devices.
While all scenarios are dire, ransomware is the most common, as it gives the threat actors the best way to monetize a successful attack.
Only yesterday, we reported that QNAP patched a zero-day vulnerability over the weekend that was used in a new wave of DeadBolt ransomware attacks.
In February, the same group also targeted ASUSTOR devices by leveraging an exploit for a previously unknown flaw.
Thus, DeadBolt is competent enough to find undocumented security gaps, let alone exploit known vulnerabilities.
Other ransomware gangs actively targeting NAS devices are Checkmate and eChoraix, both very active in 2022.
QNAP is warning customers of ongoing DeadBolt ransomware attacks that started on Saturday by exploiting a zero-day vulnerability in Photo Station.
The company has patched the security flaw but attacks continue today.
«QNAP® Systems, Inc. today detected the security threat DEADBOLT leveraging exploitation of Photo Station vulnerability to encrypt QNAP NAS that are directly connected to the Internet,» explains the security notice.
The attacks were widespread, with the ID Ransomware service seeing a surge in submissions on Saturday and Sunday.
QNAP releases patches for a zero-day flaw
QNAP released Photo Station security updates 12 hours after DeadBolt began using the zero-day vulnerability in attacks, urging NAS customers to immediately update Photo Station to the newest version.
The following security updates fix the vulnerability:
- QTS 5.0.1: Photo Station 6.1.2 and later
- QTS 5.0.0/4.5.x: Photo Station 6.0.22 and later
- QTS 4.3.6: Photo Station 5.7.18 and later
- QTS 4.3.3: Photo Station 5.4.15 and later
- QTS 4.2.6: Photo Station 5.2.14 and later
Alternatively, QNAP suggests users replace Photo Station with QuMagie, a safer photo storage management tool for QNAP NAS devices.
“We strongly urge that their QNAP NAS should not be directly connected to the internet. We recommend users to make use of the myQNAPcloud Link feature provided by QNAP, or enable the VPN service.” - QNAP.
Applying the security updates will prevent the DeadBolt ransomware and other threat actors from exploiting the vulnerability and encrypting devices. However, NAS devices should never be publicly exposed to the Internet and instead placed behind a firewall.
QNAP customers can find detailed instructions on applying the available updates and setting up myQNAPcloud in the security advisory.
Finally, it is recommended to use strong passwords on all NAS user accounts and take regular snapshots to prevent data loss in the case of attacks.
DeadBolt: the NAS ransomware bane
The DeadBolt ransomware gang has been targeting NAS devices since January 2022, using an alleged zero-day vulnerability on Internet-exposed NAS devices.
The ransomware operation conducted further attacks on QNAP devices in May and June 2022.
Earlier in February, DeadBolt began targeting ASUSTOR NAS devices using a zero-day vulnerability they attempted to sell to the vendor for 7.5 Bitcoin.
In most of these attacks, DeadBolt demanded a payment of just over a thousand USD from impacted users in exchange for a working decryptor.
However, other NAS ransomware groups demand more significant amounts from their victims.
The Checkmate ransomware targeted QNAP NAS products in July, demanding victims pay $15,000.